The HD (Heavy Duty) Target (side) (back)
(We call this one the Heavy Duty because that is exactly what it is. The target surface (silhouette) is comprised of 1/2 inch AR500 steel and measures 12 x 19.5. It sits at a 12 to 15 degree angle to control splatter. The base and upright are modular and the entire target can be broken down for transport if necessary. This base and upright basically serve as a target holder that the silhouette slides into leaving the target surface with no welds to break. The base measures 24 x 24 with the standard upright measuring 54 inches leaving the target at 63 inches (special heights are available to meet your berm requirements). The entire system weighs 80 pounds. It can only be shipped truck freight on a pallet. We can put up to three units on a pallet thus the price break at 3. This is an excellent practice or training target for civilians and Law Enforcement alike. It will withstand all of the standard non-magnum pistol calibers as well as .223 rounds meeting our standards (See about Nevco Steel) making it the perfect target for CQB and SBR training. It will also make a great rifle target and will withstand 300 Win Mag at 100 yards, and 338 Lapua at 150. The two ears holding the target on its front surface are AR500 as well. Should anything wear out, replacement parts are available below.
We are also offering this target with the surface perpendicular to the ground which is also parallel to the shooter. We have added a third AR500 ear to hold the target at the bottom. We have heard some concern about the 12 degree angle of the target so this should address those concerns. It will utilize the same modular system and 1/2 inch AR500 silhouette which can be replaced if need be. Please indicate which target you want when ordering, angled or flat. Please remember that as with all Nevco targets do not shoot this target closer than 10 yards with pistol or 25 yards with rifle.)
($250 for 3
*Barricade Target Stand
(This is a larger version of our standard stand and is constructed of the same sturdy yet light weight materials. The tubing is 24 inches outside and using 3/4 x 1&1/2 furring strips will accommodate a 2 foot x 2 foot or 4 x 4 piece of plywood or OSB to use as the barricade for the IDPA classifier, as a barricade in a course of fire or for our Law Enforcement friends, it is the correct dimension for a B-27 silhouette. It measures 20 x 26.5 x 3.75 and is stackable just like our other versions. It has thumbscrews to stabilize the target or barricade and has staking holes for ground spikes as well.) Dealer, club, and Law Enforcement pricing available.
(This is our new combination base that combines the Steel Challenge base and our Standard IDPA/IPSC target stand into one handy unit. It will accept a 2x4 to hold a topcap and Steel Challenge or Create-a-target shape or 1x2 furring strips to accept a standard IDPA or IPSC target or both! It measures 24x24x7.5 and weighs 15 pounds and is very stackable for convenience of transport. Use this to practice or shoot Steel Challenge and later to practice IDPA or USPSA (or IPSC) and never switch bases.)
Large Classic popper (down)
(This is our classic 33 inch popper with the deluxe stand. It is basically the 42 inch popper without the "head" portion. It measures 38x11x5 in the folded position. The popper itself is 33 inches of 3/8 inch thick AR500 steel and is available separately should the need arise. Total weight in either position is 52 pounds. Like our standard poppers the stand really makes this one shine. It is lightweight, locks the popper in the down position for transport and has a "T" handle for fast and easy calibration. This is one of only two official classic poppers as listed in the USPSA rule book under Appendix B4. Any other classic poppers will render any classifer stages illegal under USPSA rules.)
With Deluxe Stand
Small Classic popper (down)
(This is our classic 22 inch popper with the same deluxe stand. It is basically the 28 inch popper without the "head" portion. It measures 26x9x4 in the folded postion and like its larger counterpart, locks in that positon for easy transport. The popper itself is 22 inches of 3/8 inch thick AR500 steel and is available separately should the need arise. Total weight in either position is 25 pounds. Like our standard poppers the stand really makes this one shine. It is lightweight, locks the popper in the down position for transport and has a "T" handle for fast and easy calibration This is one of only two official classic poppers as listed in the USPSA rule book under Appendix B4. Any other classic poppers will render any classifer stages illegal under USPSA rules.)
With Deluxe Stand
Copyright © 2017 Nevco. All Rights Reserved. No part of this web page may be reproduced in any way, or by any means, without the prior written permission of Nevco.